NACHI 21320EX1 cylindrical roller bearings

Fillet Radius rb:0.60 mm; d:90.000 mm; Oil Speed Rating n2:4900 rpm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:61000 N; Grease Speed Rating n1:0 rpm; B:24.00 mm; Basic Dynamic Radial Load Rating C:58500 N; D:140.0000 mm;

Design variant/feature:BC4.18/W33GWI; r1,2 min.:23 mm; K:9 mm; Basic dynamic load rating C:5940 kN; Basic static load rating C0:14600 kN; C:400 mm; r3,4 min.:2 mm; D:560 mm; d:410 mm; B:420 mm;

Nut for removal:HM 3160; G1:28 mm; G2:G 1/4; G:Tr 300x4; B1:175 mm; Mass withdrawal sleeve:17 kg; A:9 mm; d1:260 mm; Hydraulic nut:HMV 60 E; d:280 mm;

Dimension A2:0.5938 in; Basic Static Radial Load Rating Co:1470 lbf; Distance J:2.5000 in; Dimension L:3.3750 in; Dimension A1:1.1875 in; Height T:1.4688 in; Insert Bearing IB:Stainless Steel; Dimension DA:2.6875 in; Weight W:0.57 lb; Diameter N:0.5370 in;

Basic Dynamic Radial Load Rating C:390000 N; Oil Speed Rating n2:5800 rpm; Basic Static Radial Load Rating Co:610000 N; B:92.00 mm; D:290.0000 mm; Grease Speed Rating n1:3700 rpm; Fillet Radius rb:1.00 mm; Fillet Radius ra:2.00 mm; d:190.000 mm;

Basic dynamic load rating C:1250 kN; ra max.:4 mm; d1:300 mm; Basic static load rating C0:5600 kN; H:90 mm; Da max.:168 mm; D:300 mm; d:150 mm; Reference speed:500 r/min; D1:154 mm;

N1:26.988 mm; P150°:48 kN; J min.:295.275 mm; Housing:SAFS 220; Da:180 mm; da:100 mm; Mass pillow block:38.6 kg; S:4.763 mm; P60°:141 kN; H:222.25 mm;

d:110 mm; Oil:3 000 min-1; with tapered bore:2222  ; D:200 mm; Grease:1.900 kN; Pu:52.100 kN; rs Dynamic (Cr):2.1 mm; B:53 mm; with cylindrical bore:3 500 min-1; B1:mm;

Accessories:Shield & Seal & Snap; Oil Speed Rating n2:3200 rpm; D:170.0000 mm; Grease Speed Rating n1:2200 rpm; d:95.000 mm; Sealed Speed Rating n3:2200 rpm; B:55.60 mm; Basic Dynamic Radial Load Rating C:159000 N; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:146000 N;

B:33 mm; Da:126 max; Static (Cor):61.900 kN; Pu:2.814 kN; d:55 mm; D:140 mm; Grease:5 300 min-1; ra:2 max; da:68 min; Oil:6 300 min-1;

Max. speed for PosiTrac Plus seal:1350 r/min; J max.:333.375 mm; Cap bolt recommended tightening torque:203.4 N·m; A1:111.125 mm; Initial grease fill:181.44 g; Housing:FSAF 024 KA; A2:155.575 mm; H:217.488 mm; P150°:40 kN; N1:22.225 mm;

D:120 mm; r2s (min):0.6 mm; B:31 mm; T:32.75 mm; Pu:24.390 kN; rs (min):2 mm; C:27 mm; d2:65 mm; Static (Coa):200 kN; r1s (min):1.5 mm;

Old MRC Bearing Number:202FS3; Width - Inner Ring B1:12.20 mm; Speed Rating-Single and Double Sealed Grease SDG:13000 rpm; Basic Radial Load Rating-Static SCO:3650 N; Basic Interchange FAF:202KL3; Basic Interchange BCA:8016; D:35.0000 mm; d:16.000 mm; Width - Outer Ring B0:11.0 mm; Accessories:8000

D:400.0000 mm; Grease Speed Rating n1:1600 rpm; Oil Speed Rating n2:1900 rpm; Fillet Radius ra:4.00 mm; Basic Dynamic Radial Load Rating C:507000 N; Fillet Radius rb:1.50 mm; B:78.00 mm; d:190.000 mm; Basic Static Radial Load Rating Co:710000 N;

Thrust factor K:1.76; D1 ≈:540 mm; Design variant/feature:TDI/WIY2; Calculation factor e:0.33; Comparative radial load rating CF:780 kN; B:178 mm; d:450 mm; Basic dynamic load rating C:3169 kN; Basic static load rating C0:8150 kN; Mass bearing:140 kg;